iphone 6s Mt6571 Nand firmware | flash file

iphone 6s Mt6571 Nand firmware | flash file

MT6571_NAND_Apple__6s__Apple__4.2.2__ALPS.JB7.MP.V1.14

Preloader_zr71_e_lca

iphone 6s Mt6571 Nand firmware

Android Version 4.2.2

M718_v1.9

Download free file

————————————————————————————————————–

How to install firmware?

–Browse the location of file and choose the “Scatter File” which is named as”MT65xxAndroid_scatter”
– Please wait while file is loaded in Flash tool or any other Box.
– Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
– switch-off the phone, Remove it’s battery and replace it back.
– Hit the “Download” or “Firmware Upgrade” button.
– Plug-in the USB cable to phone to connect it to your PC.
– The process will be started, and Red, Purple & Yellow progress stripes will be shown.
– “Ok” Notification will be appeared on a green circle at the end of whole process.
– Plug it out from USB cable. And you can turn it on.

Read flash Done by Cm2

 

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID    : 0xB51C1DE367F90A021DD03CCDEF8D2ADF
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_zr71_e_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6571 / V1.1.1 / zr71_e_lca / NAND
FW Size : 352 MiB

Brand     : Apple
ProdName  : Apple iPhone
ProdModel : 6s
Device    : Apple
AndroidVer: 4.2.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB7.MP.V1.14

Android Info saved

Scatter saved to : C:\Users\Mr.bhatti\Desktop\MT6571_NAND_Apple__6s__Apple__4.2.2__ALPS.JB7.MP.V1.14

Done!
Elapsed: 00:04:01
Reconnect Power/Cable!

 

 

hang On Android Logo Done by Amazefile

 [not_logged_in]صرف رجسٹرڈ صارفین ڈاؤن لوڈ لنک دیکھ سکتے ہیں[/not_logged_in]

1-First, you need to download and install Sp flash tool

2-Download and install MTK android USB drivers

[restrict userlevel=”subscriber”]
Download Free File
[/restrict]

18 Comments

  1. Devx July 5, 2016
  2. mdarafat July 8, 2016
  3. drkipa July 8, 2016
  4. sarikul July 16, 2016
  5. Busfield August 5, 2016
  6. sujanfeni786 August 12, 2016
  7. edi20 August 29, 2016
  8. nihalkhan September 15, 2016
  9. hamada October 2, 2016
  10. zanuff 19 October 10, 2016
  11. jose piñero October 31, 2016
    • admin October 31, 2016
  12. novita raihan November 6, 2016
  13. LEITH MANSI November 28, 2016
  14. nguyen phi December 4, 2016
  15. ALL FAT January 5, 2017
  16. Romany labib January 31, 2017
  17. sdbashar 41 February 2, 2017

Add Comment