Model K3 Desire 500 Clone stock firmware

Model K3 Desire 500 Clone stock firmware

MT6572__LC__Desire_500__s7_v10_lca_e_16_2_emmc__4.2.2__ALPS.JB3.MP.V1

Preloader_s7_v10_lca_e_16_2_emmc.bin

Model K3 Desire 500 Clone 

Android Version 4.2.2

Download flash file

How to install firmware?

Browse the location of file and choose the “Scatter File” which is named as”MT65xxAndroid_scatter”
Please wait while file is loaded in Flash tool or any other Box.
Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
– switch-off the phone, Remove it’s battery and replace it back.
Hit the “Download” or “Firmware Upgrade” button. Pass:  amazefileMP.V1
Plug-in the USB cable to phone to connect it to your PC.
The process will be started, and Red, Purple & Yellow progress stripes will be shown.
“Ok” Notification will be appeared on a green circle at the end of whole process.
Plug it out from USB cable. And you can turn it on.

 Read flash 

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3957524D42012F8484A411C9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRW9
[eMMC] : FLASH_CID : 1501004E3957524D42012F8484A411C9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID    : 0xC2A4524282BFE6FE84A3D64A74B27D83
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : LC
ProdName  : s7_v10_lca_e_16_2_emmc
ProdModel : Desire 500
Device    : s7_v10_lca_e_16_2_emmc
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_s7_v10_lca_e_16_2_emmc.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s7_v10_lca_e_16_2_emmc / EMMC
Android Info saved
FW Size : 474 MiB
Scatter saved to : C:\Users\Mr.Bhatti\Desktop\MT6572__LC__Desire_500__s7_v10_lca_e_16_2_emmc__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:02:22
Reconnect Power/Cable!

 [not_logged_in]صرف رجسٹرڈ صارفین ڈاؤن لوڈ لنک دیکھ سکتے ہیں[/not_logged_in]

1-First, you need to download and install Sp flash tool

2-Download and install MTK android USB drivers

[restrict userlevel=”subscriber”]

Pass:  amazefileMP.V1
Download Free File
[/restrict]

Add Comment