Qmobile LT700 Pro stock firmware | flash file

Qmobile LT700 Pro stock firmware | flash file

MT6735__QMobile__LT700_PRO__LT700_PRO__6.0__GBL7360QM_0302_T5870

Preloader_gionee6735_65u_m0

Qmobile LT700 Pro MT6735 stock firmware

Android Version 6.0

Download free file

  How to install firmware?

Browse the location of file and choose the “Scatter File” which is named as”MT67xxAndroid_scatter”
Please wait while file is loaded in Flash tool or any other Box.
Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
– switch-off the phone, Remove it’s battery and replace it back.
Hit the “Download” or “Firmware Upgrade” button.
Plug-in the USB cable to phone to connect it to your PC.
The process will be started, and Red, Purple & Yellow progress stripes will be shown.
“Ok” Notification will be appeared on a green circle at the end of whole process.
Plug it out from USB cable. And you can turn it on.

Read flash

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42314554650742033CF1C8
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D42076554C8F18303
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xC2A45242B60EF5F0D1F76DE91D215B3B
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile
ProdName  : LT700_PRO
ProdModel : LT700 PRO
Device    : LT700_PRO
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : GBL7360QM_0302_T5870

[Read Ok] : preloader_gionee6735_65u_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / gionee6735_65u_m0 / EMMC
Android Info saved
FW Size : 3810 MiB
Scatter saved to : C:\Users\Mr.bhatti\Desktop\MT6735__QMobile__LT700_PRO__LT700_PRO__6.0__GBL7360QM_0302_T5870\

All done!

Done!
Elapsed: 00:07:49
Reconnect Power/Cable!

Hang on Android Logo done by write flash

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D4231454E650742371145C8
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D4207654EC8458337
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xC2A452429A648C83A16EBE85347CDA08
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6735 , Project : gionee6735_65u_m0 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3852 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000004D80000
Erase : 0x0000000006B00000-0x000000039C280000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_gionee6735_65u_m0.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0016
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:07:40

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:36

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:08:31
Reconnect Power/Cable!

 [not_logged_in]صرف رجسٹرڈ صارفین ڈاؤن لوڈ لنک دیکھ سکتے ہیں[/not_logged_in]

1-First, you need to download and install Sp flash tool

2-Download and install MTK android USB drivers

[restrict userlevel=”subscriber”]
Download Free File
[/restrict]

2 Comments

  1. gsmpk January 19, 2017
  2. ayaz panhwar February 10, 2017

Add Comment